64 Royalty-Free Audio Tracks for "Motor Stop"

This is ambiance taken from the inside of a moving car. It captures accelerating, breaking, stopping, indicating and gear changing.

Son d’une voiture arrêtée et de son départ. Son enregistré avec un zoom h4n pro et une bonnette rycote mini wind screen. Sound of a stopped car and his departure. Sound recorded with a zoom h4n pro and a rycote mini wind screen. My sounds are licensed under the creative commons 0 license but it would be a pleasure for me to hear your work so doesn’t hesitate to comment or to send me a message with your work :).

My wife bought me this cool remote control helicopter for my birthday, so i recorded it flying around the room. At the very end, the blades knick the wall a couple times before it falls to the floor and stops. Attribution is not necessary, but if you use it, i'd love to hear what you did with it. Recorded with: sanken cs-1e, fostex fr2le.

I'm driving a renault duster with manual transmission (hand brake, ignition, start, drive 10 minutes, open windows, close windows, stop, turn off the engine). Recorded on the sony pcm d-100 (it's lying on the front passenger seat).

It's a recording of sounds of an old store refridgerator. The recorder (zoom h2) was put into the fridge. There are sounds of fridge getting opened and closed, started up and stopped. It was recorded in a dance studio, hence the music in the background audible in the beginning. Lots of interesting noises this fridge makes. Recorded with zoomh2 rear mics from inside of the fridge. Converted to flac using audacity.

Distant, quiet, consistent city ambience: traffic at street crossing, some people, airplane. Motor rumble of starting/stopping vehicles, some distant voices, little wind noise. Recorded with tascam dr100mk2 (built-in cardiods 58mm/90°, gain m9, 80hz-hp), no processing. Recorded on an april evening on the rooftop of a 5 store building in berlin moabit.

Quiet, consistent city ambience: traffic at street crossing, some distant people, a dog. Motor rumble of starting/stopping vehicles, some voices, barking. Recorded with an ortf/ck91-array into tascam dr100mk2 (gain h6, 80hz-hp), no processing. Recorded on a may evening from a 5th floor balcony (17m above street level) in berlin moabit.

Recorded from line-in from a 13-year-old boombox tuned to the bottom of the am dial and placed near the computer. You can hear the cd-player starting up, working, stopping, working again. At one point i skip through a track with winamp creating a choppy sound. When the cd player stops you can hear the base computer noise.

Quiet, consistent city ambience: traffic at street crossing, some people, airplane, one loud bang. Motor rumble of starting/stopping vehicles, some distant voices, honk, shot/bang. Recorded with tascam dr100mk2 (built-in cardiods 58mm 90°, gain h7, 80hz-hp), no processing. Recorded on an april evening from a 5th floor balcony in berlin moabit.

It's recording of a passenger train's on duty. You can hear the train's motors, the wheels rumbling against the rails, the wagon connectors hitting each other, when the train stops also people chatting. Near the end of the recording the room acoustics change, because a woman entered the area between wagons where i was standing with my recorded pointed down. I was standing in a narrow passage, where two wagons were joined, between two closed slide-doors. She have opened those so the overall sound has radically changed and i decided to end the recording. Through the entire recording the unit is moving forward, decelerating, stopping, staring and accelerating again repeatedly as it travels stopping at several stations. The recording was done with a hand-held zoom h2. Rear mics used pointed to the ground. I was in the loudest area in the whole train. I was using "low" gain (h2 has three mic gain levels to choose from: l/m/h). Viewed and converted to flac using audacity, the file hasn't been altered in any other way. Originally recorded as a 96khz/24-bit stereo wav file.

It's a recording of a man operating a chainsaw in a forest near an underground repair station. I've been biking through the forest whe i heard the chainsaw, so i stopped and recorded 7 minutes of him cutting off branches, tembers and walking around a bit. You can heat the chainsaw, natural forest reverb, sometimes a plane flying by or an undergroud train. The recording was made from around 20~30 meters from the sound source. Recorded with a zoom h2 (rear mics, hi gain, 96/24). Originally a 96khz / 24-bit wav file. Converted to flac using audacity.

This is a sound of a mercedes benz 709d mini bus driving on a really hard icy road. It was a rattly old bus, everything squeaked and rumbled on it. I videoed this journey with my canon powershot a460 digital camera, i simply took the sound from the video. It's a good sound, it turned out well thanks to the winter weather, and the rough icy road. Please note, anybody is free to use this sound, you don't have to credit me, but it would be fun to hear how you use my sound if possible. :) here is the link to the type of licence i use. Http://creativecommons. Org/publicdomain/zero/1. 0/.

Trying to start a 1983 volvo 245 after a stop at a gas station. First we hear the seatbelt warning signal after the driver turns the ignition on. The first start attempt fails. The two following attempts fail because the starter fails to engage with the flywheel, creating a very loud and unpleasant sound. There is some reverberation from the metal roof of the gas station. At 00:24, the driver remarks "he's doing it again!". The fourth attempt succeeds in starting the engine after a rather long cranking. We then drive off and we also hear some squeaking from the steering wheel. Throughout the recording we hear breathing noises from the driver (80 year old man, smoker). The recording was made in the front passanger seat with the window open, that's why there a very noticable difference between the left and right channel. Recorder: edirol r-09, 48khz wave/24-bit, cropped with cool edit pro, re-saved as 48khz wave/24-bit and compressed with flac. No other pp. Edirol r-09 settings: low cut: off, mic gain: low, agc: off. Recorded on june 15, 2012 in åkersberga, sweden.

Recorded in my dad's bedroom with lifecam hd3000 webcam. This is a much better recording than my previous oxygen concentrator file, as i hauled my desktop into the bedroom at the other end of the apartment where the machine now is, when i was home alone. The webcam is on the bed about 3 or 4 feet from the machineat the beginning of the file you hear me flip the big switch and the machine comes on with a long on beep and thumps. I edited it to start then. At 00:1. 8 what i suspect is the water pump comes on, though i may be wrong. That's when the gurgling starts though. The machine has a small reservoir for distilled water to moisten the airflow. A cup or two lasts several daysyou'll hear various hisses and thumps in a 15. 6 second cycle as it runs. At 03:03 i flip the big switch to shut the machine off, and it bubbles and gurgles away for the rest of the file, as water i assume slowly perculates back into the reservoir, the bubbling getting quieter and quieter until it doesn't even sound like bubbling anymore, until it finally ticks to a stop. At 03:16 you hear me step as i get my foot loose from the mic cord lol. At 04:13 the furnace shuts down as a car finishes going by outside in the bass register, faint traffic noises and the furnace being the only background noises you'll hear aside from my moving around a couple times, and a faint bluejay at the end. At about 07:00 you can barely hear the machine anymore, but i could hear a faint ticking with my own ears. At 07:04 the furnace comes back on. At 07:08 you'll hear a bluejay faintly calling outside and a car going by outside after, which finishes the file at 07:20. I edited out my walking to the computer to shut the recording down. From wikipediaoxygen concentrators typically use pressure swing adsorption technology and are used very widely for oxygen provision in healthcare applications, especially where liquid or pressurised oxygen is too dangerous or inconvenient, such as in homes or in portable clinics. Oxygen concentrators are also used to provide an economical source of oxygen in industrial processes, where they are also known as oxygen gas generators or oxygen generation plants. Oxygen concentrators utilize a molecular sieve to adsorb gasses and operate on the principle of rapid pressure swing adsorption of atmospheric nitrogen onto zeolite minerals and then venting the nitrogen. This type of adsorption system is therefore functionally a nitrogen scrubber leaving the other atmospheric gasses to pass through. This leaves oxygen as the primary gas remaining. Psa technology is a reliable and economical technique for small to mid-scale oxygen generation, with cryogenic separation more suitable at higher volumes and external delivery generally more suitable for small volumes. [1]at high pressure, the porous zeolite adsorbs large quantities of nitrogen, due to its large surface area and chemical character. After the oxygen and other free components are collected the pressure drops which allows nitrogen to desorb. An oxygen concentrator has an air compressor, two cylinders filled with zeolite pellets, a pressure equalizing reservoir, and some valves and tubes. In the first half-cycle the first cylinder receives air from the compressor, which lasts about 3 seconds. During that time the pressure in the first cylinder rises from atmospheric to about 1. 5 times normal atmospheric pressure (typically 20 psi/138 kpa gauge, or 1. 36 atmospheres absolute) and the zeolite becomes saturated with nitrogen. As the first cylinder reaches near pure oxygen (there are small amounts of argon, co2, water vapour, radon and other minor atmospheric components) in the first half-cycle, a valve opens and the oxygen enriched gas flows to the pressure equalizing reservoir, which connects to the patient's oxygen hose. At the end of the first half of the cycle, there is another valve position change so that the air from the compressor is directed to the 2nd cylinder. Pressure in the first cylinder drops as the enriched oxygen moves into the reservoir, allowing the nitrogen to be desorbed back into gas. Part way through the second half of the cycle there is another valve position change to vent the gas in the first cylinder back into the ambient atmosphere, keeping the concentration of oxygen in the pressure equalizing reservoir from falling below about 90%. The pressure in the hose delivering oxygen from the equalizing reservoir is kept steady by a pressure reducing valve. Older units cycled with a period of about 20 seconds, and supplied up to 5 litres per minute of 90+% oxygen. Since about 1999, units capable of supplying up to 10 lpm have been available.